News

Precision stainless steel is not a single steel grade but a technical category with extremely high requirements for the comprehensive performance of materials. It specifically refers to high-performance materials that far exceed ordinary commercial-grade stainless steel in terms of dimensional accuracy, surface finish, mechanical property stability, and corrosion  through special metallurgical techniques, precise processing methods, and strict heat treatment. The core lies in "precision control", which runs through the entire process from component smelting to final forming, to meet the strict demands of modern high-end industries for the reliability, consistency, and service life of components. Product Application: Cold Rolled Steel Strip inclued Annealed steel strip and Spring steel strip Customized according to the specialized needs of customers, it can meet the requirements of customers for small-batch customization in terms of performance such as rust prevention, strength, shape, surface, and processing performance. Typical Applications: Automotive industry such as engine gaskets, flexible connectors Braiding textile industry such as settling plates Warping sheet industry such as fillers Mechanical industry such as various elastic components Precision stainless steel strips are not only characterized by their thin thickness, but also by their small tolerance in performance indicators and size. The rapidly developing electronics industry best demonstrates the application of precision stainless steel strips. Application   Internal components of mobile phones, polished shells Electronic products, armored optical cables Injection needles, flexible solar panels  

Hot Rolled Steel Coil The operating rate of the country's key hot-rolled strip steel producers this week was 75.00%, up by 4.00 percentage points compared with the previous week and by 10.00 percentage points compared with the previous month; the capacity utilization rate was 72.16%, down by 0.76 percentage points compared with the previous week and up by 6.30 percentage points compared with the previous month; the actual production of steel mills this week was 213.40 million tons, down by 2.25 million tons compared with the previous week and up by 18.62 million tons compared with the previous month;Carbon Steel Coil the inventory in the steel mills' warehouses was 38.13 million tons, down by 0.47 million tons compared with the previous week and down by 1.34 million tons compared with the previous month.  The overall production rate of hot-rolled strip steel in the Beijing-Tianjin-Hebei region was 75.00%, Alloy Steel Coil up by 6.67 percentage points compared with the previous week and by 18.33 percentage points compared with the previous month; the capacity utilization rate was 74.06%, down by 0.09 percentage point compared with the previous week and up by 12.05 percentage points compared with the previous month.  The production rate of 145mm steel strips in Tangshan was 45.45%, remaining unchanged compared with the previous week and rising by 36.36 percentage points compared with the previous month. The production capacity utilization rate this week was 43.73%, decreasing by 6.01 percentage points compared with the previous week and rising by 22.69 percentage points compared with the previous month. The production rate of steel strips over 232mm was 91.67%, rising by 12.50 percentage points compared with the previous week and rising by 25.00 percentage points compared with the previous month. The production capacity utilization rate this week was 88.51%, rising by 2.91 percentage points compared with the previous week and rising by 14.12 percentage points compared with the previous month.

Starting from August, galvanized sheet inventory began to rise. As of August 15, 2025, Mystee statistics showed that the social inventory of galvanized sheet was 113.43 million tons, with a cumulative increase for four consecutive weeks. Moreover, since March, the export volume of galvanized sheet has started to decline, and it has decreased month-on-month for three consecutive months. Although the monthly export of cold-rolled sheet has decreased, its proportion in exports compared to production is not significant. On the other hand, galvanized sheet mainly serves the construction industry, while enterprises serving the automotive and home appliance industries account for a relatively small proportion. Meanwhile, cold-rolled sheet mainly serves the manufacturing industry, resulting in a further narrowing of the price gap. Although the current cold and hot sheet price gap has widened, it remains within a fluctuation range of 400-500 yuan/ton, and there is little possibility of further expansion. This price gap structure mainly stems from the market pattern of "a mutual game between cost support and weak demand", and it is unlikely to be fundamentally improved in the short term. The slow accumulation of cold-rolled sheet inventory indicates that the short-term accumulation direction is relatively clear, reflecting the current imbalance in the supply and demand situation. Currently, the main downstream industries such as automobiles, home appliances, and machinery have shown no particularly outstanding performance in the past month, making it difficult to strongly stimulate the demand for cold-rolled sheet. Based on these circumstances, the author believes that the market is expected to continue to fluctuate narrowly in the short term, with the cold and hot sheet price gap fluctuating within the low range of 400-500 yuan/ton. The demand side is difficult to significantly improve, and the adjustment rhythm of the supply side will become a key variable. In the medium and long term, the market trend depends on the process of supply and demand rebalancing. If steel mills can continue to reduce production, it can alleviate some supply pressure, and the price may gradually stabilize and rebound, and the price gap relationship may also be restored. However, the demand side is unlikely to have an unexpected performance, thus limiting the rebound height.  

The globally first-to-market product ESW8517 has set a new industry record with its global lowest iron loss of 7.9W/kg (400Hz), and its magnetic performance indicators at a thickness of 0.1mm have reached the world's leading level. This product not only represents a major breakthrough in performance but also makes an innovative progress in balancing strength and magnetic performance. With a yield strength of 490MPa, it increases the safety factor of the motor by 11%, and improves the motor efficiency by 0.72% under CLTC conditions. The launch of ESW8517 precisely matches the future design trend of high-speed motors, injecting strong impetus into the upgrade of high-efficiency motors and the new energy vehicle industry, providing a new technical solution for achieving the "dual carbon" goals, and leading the industry towards a new era of high efficiency and low carbon The disruptive design opens up a "second curve" for motor performance improvement, not only fundamentally solving the problem of severe deterioration of iron loss during the process of iron core casing, but also contributing to the improvement of iron loss, significantly enhancing motor performance. This technology can also be combined with self-bonding and annealing technologies, pushing the comprehensive performance of motors to a new dimension and opening up a new technical route for breaking through the performance limits of motors. The pioneering thin-film high-viscosity self-bonding coating technology increases the bonding strength by 50% under the same film thickness and reduces the film thickness by 30% under the same bonding strength, further enhancing the applicability of rapid self-bonding in the field of new energy vehicle motors, providing new material technology support for ultra-quiet, high-efficiency, and extremely stable new energy vehicle.   The picture above provides an introduction to the parameters of other steel grades.The globally first-to-market product 20RSW175 is a high magnetic permeability non-oriented soft magnetic material specifically designed for humanoid robots. With a magnetic induction intensity of 1.75T, it increases the torque by 1.6% compared to conventional products and reduces iron loss by 27%, effectively meeting the development needs of high torque density and high power density for frameless torque motors used in humanoid robots. It fills the gap of high magnetic permeability non-oriented soft magnetic materials in China and ignites a new engine for the development of the Chinese humanoid robot industry.

In terms of the macro situation: In July, the manufacturing PMI of China was 49.3%, a decrease of 0.4 percentage points from the previous month; the business activity index of the construction industry was 50.6%, a drop of 2.2 percentage points from the previous month. Due to weather factors such as high temperatures and heavy rain, July entered a production off-season, and the production and operation activities of the manufacturing and construction industries slowed down.  On the supply side: According to Mysteel's research, the output of five major steel products this week was 8.6742 million tons, Carbon Steel Coil；Alloy Steel Coil；Mild Steel Coilan increase of 0.0045 million tons compared with the previous week. Among them, the output of rebar, wire rod and medium and heavy plates decreased, while the output of hot-rolled coil and cold-rolled coil increased.  In terms of inventory: The total inventory of the five major types of steel this week was 13.5189 million tons, an increase of 153,900 tons compared with the previous week. Among them, the inventory of steel mills was 4.0952 million tons, an increase of 10,000 tons compared with the previous week; the social inventory was 9.4237 million tons, an increase of 152,900 tons compared with the previous week.  Although the futures of coking coal and coke have been rising continuously in the early stage, which once stimulated the speculative demand in the steel market to be active, the demand in the off-season is difficult to improve continuously and may return to a weak state later. Meanwhile, the profits of steel mills have risen significantly recently, and the output is hard to be reduced. It is expected that the supply and demand pressure will increase later and the inventory reduction will be blocked. Besides, with the fading of the market's speculative sentiment, the short-term steel price may fall weakly.

Recently, due to the continuous congestion at European ports, MSC has raised the freight rates for the Far East to Northern Europe route twice since June 1st. After July, MSC initiated targeted adjustments for the congestion issue and the two routes no longer call at the Antwerp port.  Specifically, the "Swan" service, which connects the Far East, Northern Europe and Scandinavia, has cancelled the outbound stopover at Antwerp and shifted to Felixstowe Port, the largest port in the UK; the "Britain" service has cancelled one inbound stopover at Antwerp and only retains the outbound stopover.  Not only MSC, but also Gemini (operated by Maersk and Hapag-Lloyd) has made adjustments to the Far East - Northern Europe route, which indirectly reflects the congestion situation at European ports.  In fact, the route adjustments made by the shipping company MSC are not a random decision but rather the result of short-term operational pressures and long-term strategic planning working together. Their impact is gradually permeating into the European port landscape.

Li Qiang pointed out that China is willing to strengthen cooperation with the European Central Bank in areas such as international monetary system reform. This year, China has implemented more proactive macro policies, increased efforts in countercyclical regulation, and taken multiple measures to expand domestic demand and boost consumption, which can fully hedge against the impact of external unfavorable factors. The US Department of Commerce announced that it will impose tariffs on various steel household appliances, including "steel derived products" such as dishwashers, washing machines, and refrigerators, starting from June 23rd. It is reported that setting a 50% tariff on most countries will affect the import of these steel products, which may lead to an increase in consumer prices. Industry stakeholders are closely monitoring the development of the situation. This week, the supply of five major steel varieties was 8.5885 million tons, a decrease of 215300 tons on a week on week basis, with a decrease of 2.4%; The total inventory is 13.5456 million tons, with a weekly decrease of 92500 tons or 0.7%; The weekly consumption was 8.681 million tons, of which the consumption of building materials decreased by 3.5% month on month, and the consumption of sheet metal decreased by 0.5% month on month.  On June 12th, the domestic steel market fluctuated and operated weakly, with Tangshan Qian'an Pu billet factory price including tax falling by 30 to 2890 yuan/ton.

The spokesperson of the Ministry of Commerce answered questions from reporters regarding the remarks made by the United States. Recently, there have been continuous reports from the US side that China has violated the consensus of the China US Geneva Economic and Trade Talks. What is the evaluation of the Ministry of Commerce on this?   Answer: The Chinese side has taken note of the relevant situation. On May 12th, after the release of the "Joint Statement of the Geneva Economic and Trade Talks between China and the United States", China cancelled or suspended relevant tariff and non-tariff measures against the United States in accordance with the consensus reached in the joint statement. The Chinese side takes a responsible attitude, treats it seriously, strictly implements it, and actively maintains the consensus of the Geneva Economic and Trade Talks. China is firm in safeguarding its rights and interests, and implementing consensus is honest.   These actions seriously violate the consensus reached during the January 17th phone call between the two heads of state, seriously undermine the existing consensus of the Geneva economic and trade talks, and seriously harm China's legitimate rights and interests. The United States continues to provoke new economic and trade frictions unilaterally, exacerbating the uncertainty and instability of bilateral economic and trade relations. It not only fails to reflect on itself, but also unfairly accuses China of violating consensus, which seriously deviates from the facts. China firmly rejects unreasonable accusations.   The Joint Statement of the China US Geneva Economic and Trade Talks is an important consensus reached by both sides under the principles of mutual respect and equal consultation, and the results are hard won. We urge the US and China to move in the same direction, immediately correct their erroneous practices, jointly uphold the consensus of the Geneva Economic and Trade Talks, and promote the healthy, stable, and sustainable development of China US economic and trade relations. If the US persists in its unilateral actions and continues to harm China's interests, China will continue to take resolute and effective measures to safeguard its legitimate rights and interests.

The current cold-rolled sheet and coil market presents a structural contradiction of "high capacity and low inventory". The overall capacity of cold-rolling is sufficient, and the production load of steel mills is relatively high, but the actual circulation resources are tight. During the same period, both social inventories and steel mill inventories were at a low level. Particularly, the circulation of common steel resources decreased compared to the previous two years, while the order intake of special steel was good and the production proportion was high, which provided some support for the price of cold-rolled steel. However, from the perspective of macro policies, the US tariff policy may promote the shift of cold-rolled steel exports to domestic sales, and the increase in the return of domestic cold-rolled steel resources may suppress the spot market price of common steel in China. However, special steel has been relatively less affected due to the strong domestic demand.   Low inventory is not a health signal. We need to be vigilant against the risk of another mismatch between supply and demand. It is suggested that market participants and steel mills optimize production scheduling, balance the proportion of special steel and common steel, and avoid excessive reliance on a single market. Strengthen the research and development of high-strength steel technology and consolidate the advantages in the high-end market. Traders purchase common steel materials as needed to avoid inventory overstock. They pay attention to the order dynamics of terminal enterprises. Carbon Steel Coil；Alloy Steel Coil；Mild Steel CoilTerminal enterprises plan their procurement plans in advance and lock in the long-term negotiated prices of special steel. The true recovery of the industry needs to wait for the confirmation of three signals: the stabilization of the real estate market, the recovery of manufacturing investment, and the restoration of stable growth in the export market. Before this, maintaining a cautious business strategy will be the key to survival and development.

Against the backdrop of profound adjustments in the global economic landscape and the continuous advancement of domestic industrial policies, tariff policies have become an important variable influencing the sentiment and supply and demand directions of the steel strip market. As of now in the middle and late April 2025, the traditional peak season demand has fallen short of expectations. The market is characterized by manufacturers actively reducing inventory, relatively high supply, but continuous price decline, insufficient confidence among enterprises, and price differentiation among regions and varieties. In late April 2025, the coil and strip market presented a structure of stable domestic demand and reduced overseas demand. Domestic supply is relatively high. Enterprises' proactive inventory reduction has accelerated the digestion speed in various regions, but the differentiation is obvious. There is a mismatch in cold and hot varieties, coil and strip varieties, and regional markets, resulting in a serious price inversion. At present, manufacturers' willingness to replenish inventories in the early stage of the short holiday has not yet emerged, and prices remain in a weak and volatile pattern. It is expected that in the second half of the year, as market confidence recovers, the supply and demand relationship of coil and strip may improve. However, a significant price rebound still requires clear policy or demand stimulus.   It is suggested that manufacturers establish a dynamic supply and demand monitoring mechanism, closely monitor the data changes of Mysteel, rationally utilize big data to analyze the mismatch of regional markets and variety structures, flexibly adjust production schedules and inventory strategies, and give priority to ensuring the supply of high-demand regions and varieties. At the same time, we will strengthen the cost control system, accelerate the upgrading of the product structure, focus on the demands of emerging fields such as new energy and high-end equipment manufacturing, develop high value-added coil and strip products, and simultaneously improve strategic coordination with upstream and downstream enterprises to enhance the risk resistance capacity of the industrial chain.

Blackrock CEO Larry Fink said on Monday that many business leaders believe the U.S. economy may already be in a deep recession. "Most of the ceos I talk to are saying we could be in a recession right now," Fink claimed at an economic event that day. The asset manager executive also said he believes Trump's tariff policies could put upward pressure on inflation and make it more difficult for the Fed to cut interest rates, as it usually does during a recession. "I think there's zero chance the Fed will cut rates four times this year. I'm more concerned that we could have a spike in inflation that would lead to a much higher base rate than it is now." According to CME data, the market expects the Fed to start cutting rates aggressively in June, with cuts of at least 100 basis points by the end of the year. Regarding the recent slump in the U.S. stock market, Fink commented that he still does not rule out the possibility of another 20% drop in the U.S. stock market, but he believes that this is a rare long-term buying opportunity. By the end of 2024, BlackRock had more than $11 trillion in assets under management. Because of the size of its assets under management, BlackRock wields enormous influence in global financial markets. Not only is it a significant shareholder in many large companies, it also influences the direction of the global economy through its investment decisions and market views. At the same time, business leaders and billionaires are slamming Trump as tariffs rattle global financial markets. Pershing Square Capital founder Bill Ackman, who backed Trump's presidential bid, warned on Sunday that going ahead with the new tariffs would be tantamount to starting an "economic nuclear war." Ackman said that if the new tariffs do go into effect, business investment will stall and consumers will keep their wallets closed. "Tariffs will severely damage our country's reputation in the rest of the world, which could take years or even decades to recover." Billionaire Stanley Druckenmiller said Monday that he "does not support tariffs above 10 percent." Even Musk, the world's richest man and Trump's top aide, said on Sunday that he wanted "zero tariffs" between Europe and the United States. Echoing Ackermann, Simon MacAdam, deputy chief global economist at Capital Economics, said businesses may hold off on investment, in large part due to "uncertainty" created by Trump's tariff policies. "If these tariffs are going to come down again in a few months, you're wasting your time investing hundreds of millions of dollars in new factories in the United States." Some of our products that may be affected areAnnealed Steel Strip，Spring Steel strip，High Carbon Steel Strip，Steel Strip For Hardware Tools，Steel Strip For Auto Parts，

On March 25, the Xipo Iron Ore project jointly developed by China Baowu and Rio Tinto Group ushered in an important milestone - the most critical belt system was put into production on schedule, marking the full completion of the main project, with large-scale production capacity, and providing strong support for the stable operation of Baowu iron ore supply chain and the guarantee of steel resources.   The Xipo project, located in the Pilbara region of Western Australia, is another joint venture iron ore project between Rio Tinto Group and China Baowu following the Baorui Ji Dongpo project, with a total investment of about 2.4 billion Australian dollars and a designed annual capacity of 25 million tons of iron ore. In Baowu, the project is implemented by Baowu Resources.Carbon Steel Coil，Alloy Steel Coil，Mild Steel Coil。   The West Slope project started large-scale construction in March 2023, began highway production in June 2024, and the belt was completed and put into operation on the 25th of this month and began heavy load trial production. Previously, the project mainly relied on road transportation, and the smooth operation of the belt system further improved the ore transportation capacity, which can provide a more stable supply of raw materials for downstream production.   The crushing and belting system consists of a crusher with a designed capacity of 6,000 tonnes per hour and an 18-kilometre belt conveyor system to transport the ore to the existing processing plant at Paraburdu. The next step will be to focus on promoting the capacity climb of the belt system and completing the remaining finishing work safely and efficiently.   As an important part of Baowu Resources' overseas resource development, the advancement of the Xipo project will help optimize the global iron ore supply chain and is of great significance to creating the most reliable, greenest and safest raw material supply chain for steel. In the future, Baowu Resources will continue to improve the level of supply chain management, promote the coordinated development of the industrial chain, and contribute to the green and low-carbon transformation of the steel industry

Intelligence is undoubtedly a revolutionary opportunity for the steel industry, which not only marks a technological innovation, but also a key force to promote the industry to high-quality development." On March 10, Hu Wangming, Party secretary and chairman of China Baowu Iron and Steel Group Co., LTD., a member of the National Committee of the Chinese People's Political Consultative Conference, said in an interview with a reporter from China Metallurgical News during the third session of the 14th session of the National Committee of the Chinese People's Political Consultative Conference that the real value of intelligence in the steel industry is to solve the long-term pain points of the industry through technological innovation and model change, and release great potential. Drive the steel industry towards a more efficient, greener and smarter future. This is an irreversible change, but also the only way for steel enterprises to achieve high-quality development.   "The mature steel intelligent manufacturing model realizes the deep integration of digitalization, automation and intelligence." Hu Wangming pointed out that at present, the intelligent upgrading of the steel industry is still in the early stage, thinking to speed up the change, and technology needs to be broken through. In the steel industry, most enterprises still regard intelligence as a means of empowerment, only see the breakthrough of artificial intelligence at the technical level, and have not formed a general understanding that artificial intelligence will profoundly drive the transformation of the steel industry, and lack a deep understanding of intelligent transformation and upgrading. From the perspective of technology supply, AI technology has the problems of more general large models, less professional large models, more social large models, less industrial large models, and the overall lack of original innovation in industrial AI, which requires the joint construction of a new R & D model of "common answer to the same problem".   In this regard, Hu Wangming suggested at the National Two sessions this year to accelerate the "artificial intelligence +" action, drive the upgrading of traditional industries, encourage industry leading enterprises to take the lead in laying out application scenarios, and drive the industry to accelerate transformation. Build an innovation platform for industrial chain integration, promote breakthroughs in core technologies, promote in-depth cooperation between upstream and downstream enterprises and scientific research institutions, and focus on key technologies and industry pain points of digital-real integration. Strengthen industrial collaboration, accelerate the cultivation of digital emerging industries, encourage leading manufacturing enterprises to be good "question makers", promote the opening of the scene, adhere to the "common answer to the same question", and promote the integrated development of digital industry and real industry.Especially in Carbon Steel Coil,Alloy Steel Coil,Mild Steel Coil   In addition, in view of the large scale of excess capacity in China's steel industry and the high cost of production capacity, Hu Wangming also proposed at the national two sessions to formulate policies on steel capacity governance and increase market-oriented governance.

The Political Bureau of the Communist Party of China (CPC) Central Committee held a meeting on Feb. 28 to discuss the draft government Work report, which The State Council intends to submit to the third session of the 14th National People's Congress for deliberation. Xi Jinping, General Secretary of the CPC Central Committee, presided over the meeting. The meeting stressed that we will implement more proactive macro policies to expand domestic demand, promote the integrated development of scientific and technological innovation and industrial innovation, stabilize the property and stock markets, prevent and defuse risks and external shocks in key areas, stabilize expectations and stimulate vitality, promote a sustained economic recovery, constantly improve people's living standards, and maintain social harmony and stability. The Third session of the 14th National People's Congress (NPC) will hold a press conference at 12:00 on March 4, 2025 (Tuesday) in the Press Conference Hall of the Great Hall of the People. The spokesperson of the NPC will answer questions from Chinese and foreign journalists on the agenda of the Congress and the work of the NPC High Carbon Steel Strip. In March, two blast furnaces are scheduled to be repaired, with a production capacity of about 12,000 tons/day; There are 17 blast furnaces planned to resume production, involving a capacity of about 74,500 tons/day Carbon Steel Coil.

The British Department of Business and Trade announced a steel industry development plan on the 16th, and the plan is open to consultation. The plan aims to ensure that the UK steel industry can remain globally competitive and meet the challenges posed by the US steel and aluminium tariffs.   According to this plan, the British government will inject 2.5 billion pounds to support the development of the local steel industry and encourage domestic infrastructure projects to prioritize the use of local steel. In addition, the plan will also guide steel producers from high-polluting blast furnaces to electric arc furnaces, strengthen scrap recycling, reduce carbon emissions and promote green transformation.   Business Secretary Jonathan Reynolds said: "Steel manufacturing in the UK not only creates a lot of jobs, but also drives product innovation and foreign trade, and strengthens the UK's manufacturing base. It is estimated that the offshore wind industry alone will consume 25 million tonnes of steel by 2050, and this demand will create a market space of £21 billion for UK steel companies.   US President Donald Trump signed a document on the 10th, announcing a 25% tariff on all US steel and aluminum imports. In response, Reynolds told the British media that Britain can provide the United States with "very specialized" steel and aluminum products. The new tariffs will increase costs for American taxpayers and weaken the trade relationship between the two countries.   The British Iron and Steel Association warned that the US steel and aluminum tariffs would deal a "devastating blow" to the UK's steel trade with the United States. Data show that the US market accounts for 10% of UK steel exports, and US steel and aluminum tariffs are expected to cost the UK tens of millions of pounds a year. In addition, a large amount of steel that cannot reach the US market could flood the UK market and drive down prices, hitting local steelmakers Raw materials are:Hot Rolled steel Coil，Cold Rolled steel strip，Silicon Steel

US President Donald Trump signed an executive order on Monday imposing a 10% tariff on goods imported from China. This latest trade protection measure of the United States has been widely opposed by the international community and the United States.   The White House said on the same day that the United States would impose a 10% tariff on all goods imported from China on top of existing tariffs. Trump said this dovetails with the "protectionist measures" he supports.   The Chinese Foreign Ministry spokesperson said earlier that China has repeatedly stated its position and always believes that there is no winner in a trade war and tariff war. China has always been firm in safeguarding its national interests. A spokesman for China's Commerce Ministry said earlier that China's position on the tariff issue is consistent. The tariff measures are not good for either China or the US, nor for the whole world.Some of our products are very popular in the United States and Canada and Mexico, such as Carbon Steel Coil, Alloy Steel Coil, Mild Steel Coil.   According to the executive order, the United States will also impose a 25% tariff on imports from Mexico and Canada, including a 10% tax increase on Canadian energy products.

A few days ago, the relevant leaders of the Ministry of Ecology and Environment visited the Henan Liyuan Group's 1.28 million tons/year coking integration and upgrading and supporting gas comprehensive utilization project designed by Shandong Metallurgical Design Institute Co., LTD. (referred to as Shanye Design) during the investigation in Henan, and highly praised the Henan Liyuan Group's carbon reduction effect on the local. Praised Henan Liyuan's coke project dare to paste tiles on the coke oven, and still achieve spotless, representing today's advanced low-carbon,Hot Rolled steel Coil,Cold Rolled steel strip, environmental protection and intelligent management level in China and even the world. Since 2024, there have been domestic and foreign guests invited or attracted to visit Henan Liyuan, the most time to welcome more than 600 guests a day to visit. Surrounded by mountains and rivers,Cold Rolled Stainless Steel Strip tree-lined, a large industrial equipment stands firm, a factory building, office buildings, control rooms, laboratories in an orderly arrangement, a wide and clean road stretching in all directions, super clean production environment and green low-carbon chemical products, it is difficult to imagine that this is a coal chemical enterprise. "Shock, marvel" has become the first experience of visitors, have the thumbs up, are exploring Henan Liyuan coking into the "pearl of the Central Plains" mystery. Hand in hand Shanye design, hand in hand world class At the beginning of 2020, Fu Yutang, chairman of Henan Liyuan Group, learned that the 7.3-meter coke oven in Rizhao Fine Base of Shansteel designed and contracted by Shanye applied the current international leading low-carbon and environmental protection technology, and the indicators were far ahead in China, and then Fu Yutang arranged the relevant technical personnel of the enterprise to visit the site of Shansteel Rizhao. The first-class technical indicators and site management of Rizhao coke oven of Shangang have confirmed the strength and model of the national "13th Five-Year Plan" innovation project. Shortly thereafter, Shanye design leaders were invited to Henan Liyuan for the first discussion and exchange. In the days of Liyuan, the leaders of the two enterprises introduced their respective development experiences in detail in a way of home talk. The reason why Shanye Design's growth and development process can develop from millions of yuan of operating income in the year to the current annual operating income of 4 billion yuan is that Shanye Design always puts technological innovation and crisis awareness in the first place. The "sincere" and "all for the sake of users" as the core value orientation of the enterprise results. Shanye design relies on integrity to treat customers, with a sense of crisis to motivate continuous progress, with technological innovation and continuous development of entrepreneurial experience, all of a sudden and Henan Liyuan Group leaders had a strong resonance. The two companies have the same corporate culture and similar corporate style of seeking development in difficulties, so that they talk more and more close. When it was heard that Shanyang Design has long been committed to the research and development and application of advanced and low-carbon technologies in iron and steel metallurgy, and has taken the lead in promoting the use of blast furnace dry dust removal and converter dry dust removal technology in China, and has been at the forefront of green intelligent metallurgy and creating high-quality ecological circle of steel, the leaders of Liyuan Group gave a thumbs up. The more the leaders of the two companies talked about the more speculation, the more they talked about the more resonance, and Fu Yutang immediately expressed his willingness to cooperate after a lot of understanding. On the way back from Shanye design leaders, Fu Yutang called to inform that the project of 1.28 million tons/year coking integration and upgrading and supporting comprehensive utilization of gas projects was finalized. The project is finalized, but good things take time.Like steel strip,cold roll steel strip. The project began at the time of the new coronavirus outbreak. On February 20, 2020, Song Zhishun, former deputy general manager and current chairman of Shanye Engineering, led a team of 7 people with a certificate of departure from Jinan and promised to self-quarantine for 14 days after returning from Liyuan. But contrary to expectations, highway exit waiting for Song Zhishun line is to return instructions, is originally "tiger mouth" to take down the project, there can be no other changes, Shanye design team immediately decision, notify Liyuan Group for point-to-point pick-up, so after ten days, we eat and live in Liyuan, put the general map, take the program, This deeply moved all the staff of Liyuan Group. "At the height of the COVID-19 epidemic, Shanye designed in reverse order to help Liyuan Group's project construction. Your success is not unreasonable." Fu Yutang said.

Securities Times E-Company News: According to a research report by China International Capital Corporation (CICC), it is difficult to see significant improvement in the steel supply and demand pattern and profits in 2025. However, the structural market conditions brought about by the expected game of sectors and the structural market changes in the pattern can still be expected. The core four main lines are: 1) the release of new market value management policies, and the undervalued high-quality cash flow assets are expected to experience profit recovery and value reassessment; 2) The expected wave of stable growth continues to unfold, and high elasticity targets are expected to fully benefit; 3) The recovery of the manufacturing industry is favorable for the special steel leader with high growth certainty; 4) Industry mergers and integration are accelerating, and targets with high integration potential are expected to receive excess returns，Our product like cold rolled steel strip, hot rolled steel coil and Flat steel,The Supply and Demand Pattern of Steel in 2025.

1), the waste galvanized sheet is cut into 2xzcm galvanized iron sheet by cutting machine; 2) Add the galvanized iron sheet to the vacuum mixing container, start the external heating device to heat the vacuum mixing container, the heating temperature is 495℃, stirring for 30min, most of the zinc on the galvanized iron sheet is peeled off, and the galvanized iron sheet and metal powder with partial zinc removal are obtained after cooling，One of the steel substrates is Mild Steel Coil，Carbon Steel Coil，High Carbon Steel Strip; 3) Galvanized iron sheet, steel ball and paraffin oil with partial zinc removal are added to the vertical stirring ball mill according to a certain mass ratio, and the residual zinc and a small amount of iron on the galvanized iron sheet are rubbed off by ball milling for 20-40min, and the metal powder with oil removal is obtained by alcohol cleaning and screening; 4), the step 2) and step 3 to get the metal powder mixed, further research and treatment, using a magnetic separator for magnetic separation of metal powder, zinc powder and iron powder. 2. According to the method of recovering zinc in the waste galvanized sheet described in claim 1, the characteristic is that the thickness of the waste galvanized sheet is 0.3-0.5mm. 3. A method for recovering zinc from a waste galvanized sheet described in claim 1 is characterized in that the reaction pressure in step 2 is 2KPa. 4. According to the method of recovering zinc in a discarded galvanized sheet described in claim 1, the characteristic is that: in the step 3), the diameter of the steel ball is 30mm, and the mass ratio of the galvanized iron sheet to the steel ball and paraffin oil is 1.5:1:0.05. 5. According to the method of recovering zinc in the waste galvanized sheet described in claim 1, the speed of the vertical stirring ball mill is 200-300r/min in the step 3. 6. According to the method of recovering zinc from waste galvanized sheet described in claim 1, the characteristic is that: in the step 4), the particle size of the metal powder after grinding treatment ranges from 200 mesh to 300 mesh.

2024 Sept. We have developed domestically advanced lead bath quenched and heat-treated steel strips with a width exceeding 600mm Steel grade :75Cr1 80CrV2 high carbon lower bainite steel strips mainly used for circular saw blade.  Carbon steel can be divided into low carbon steel, medium carbon steel, and high carbon steel according to its chemical composition (i.e. carbon content, cold rolled steel strip, hot rolled steel coil)   ⑴ Low carbon steel refers to carbon steel with a carbon content of less than 0.25%. Low carbon steel is easy to accept various processing such as forging, welding, and cutting, and is commonly used in the manufacture of chains, rivets, bolts, shafts, etc.   ⑵ Medium alloy steel refers to carbon steel with a carbon content of 0.25% to 0.60%. There are various products such as killed steel, semi killed steel, boiling steel, etc. In addition to carbon, it may also contain a small amount of manganese (0.70% to 1.20%). According to product quality, it is divided into ordinary carbon structural steel and high-quality carbon structural steel. Good thermal processing and cutting performance, but poor welding performance. Strength and hardness are higher than low carbon steel, while plasticity and toughness are lower than low carbon steel. Hot rolled and cold drawn materials can be used directly without heat treatment, or they can be used after heat treatment. The quenched and tempered medium carbon steel has good comprehensive mechanical properties. The highest achievable hardness is approximately HRC55. High carbon steel refers to carbon steel with a carbon content greater than 0.6%, commonly known as tool steel, which can be quenched and tempered. Hammer, pry bar, etc. are made of steel with a carbon content of 0.75%; Cutting tools such as drill bits, wire taps, reamers, etc. are made of steel with a carbon content of 0.90% to 1.00%.